121806. 16E1+100M PDH Multiplexer

16E1+100M PDH optical multiplexer is a kind of point-to-point optical transmission equipment developed by our company on the core of large-scale integrated circuit chips. It is applicable to remote transmission of switches, and small/medium-capacity applications transmitted over fibers, including mobile communication base stations, wireless local communication base stations and paging stations. The equipment features perfect overall performance, stable and reliable operation, low power consumption, high integration, small size and easy installation and maintenance. It is intended for carries and such fields as post and telecommunications, electrical power, railway, water resources, oilfields, and banks.

Detailed description

Product Features:

BC-CLINK240A adopts two integrated media converter modules operating in active/standby mode (optional);
Providing 16 E1 (2.048KB/S) interfaces and one wire speed 10/100M adaptive Ethernet interface;
Full duplex/half-duplex adaptive operating mode;
Full digital clock recovery and smooth phase lock technology;
The code pattern of the E1 interfaces is HDB3 code, and the E1 jitter tolerance, transfer characteristic and output jitter completely meet the ITU-T G.703, G.823 and G.742 protocol.
One PCM, without occupying 2M channel for transmission;
Providing a user RS232 transparent data channel, and supporting unified network management;
Providing perfect alarm and indication signals as well as alarm mask functions, using LED to display local and remote alarms and general alarms, capable of controlling remote loop back;
Ensuring a transmission distance of over 40 km without relay;
Board-level design for the integrated equipment, featuring high reliability and stable performance;
Optional 220V AC power supply or -48V DC power supply.

Specification:

Parameter	Specifications
E1 interface	In compliance with ITU-T G.703/G.704 protocol Rate: 2.048Mb/s; code pattern: HDB3 Interface impedance: 75ヘ BNC interface (unbalanced)/ 120ヘ RJ45 interface (balanced) Permitted input frequency shift: 2.048MHz 【100PPM Jitter characteristic: In compliance with ITU-T G.703/G.704 protocol
Optical interface	Wavelength: Single mode 1310 nm (optional 1550 nm) Transmitting power: -10dBm/-5dBm (to be specified in order) Receiving sensitivity: Better than -36dBm (BER < 10^-11) Connector: FC
Ethernet Interface	In compliance with IEEE802.3/IEEE802.3u standard, using standard RJ45 connector Supporting wire-speed 10Base-T/100Base-TX, full duplex/half-duplex adaptive mode Supporting automatic crossover of twisted pairs
RS232 interface	One RS232 interface for use of the NMS, at the rate of 9600 bit/s, in DCE mode One RS232 interface for use of user; at the rate of 300--19.2 Kbit/s, adaptive, in DTE mode Both RS232 interfaces share the same DB9 connector
Order wire phone	The order wire phone is a common telephone set (two-wire phone), without occupying any E1 channel; In the case of hook-off at the local end, ringing tone will be generated at the remote end, and ring back tone will be heard at the local end. If one party hooks on, the other party will hear busy tone. After the peer party hooks on, if the party at the local end does not hook on in 90 seconds, a kind of howler tone will be generated.
Audio channel	Compression rate: A law in ITU G.711 Impedance: 600ヘ (balanced) Audio range: 300Hz---3400Hz Return loss: Not less than 18 dB
Power	Capable of dual power supply, mutual hot backup AC 220V: 220V (AC) input, allowing 175V~264V (AC) DC -48V: -48V (DC) input, allowing -40V~-60V (DC)
Power Consumption	< 10W
Operating Environment	Operating temperature 0~55ìC Relative humidity: ÷95% (at 25ìC)
Dimensions	483 mm *(L)44.5 mm (W)220 mm (H)*